Aberrant occlusal sensitivity in adults with increased somatosensory amplification: a case-control study.

OBJECTIVES: Occlusal sensitivity (OS)-the ability to detect fine objects between opposing teeth-mainly relies on the activity of mechanoreceptors located in the periodontal ligament. We tested whether somatosensory amplification (SSA)-the tendency to perceive normal somatic sensations as being intense, noxious, and disturbing, which plays a critical role in hypervigilance-affects OS. MATERIALS AND METHODS: We measured OS in 66 adults divided into three groups based on their SSA scores (LowSSA, Intermediate - IntSSA, HighSSA) by asking them to bite on aluminum foils (8 to 72 µm thick) and a sham foil, and report whether they felt each foil. We performed 20 trials for each thickness and sham condition (each participant was tested 120 times), and compared the frequency of correct answers (%correct) among groups after adjusting for participants' trait anxiety, depression, self-reported oral behaviors, and masseter cross-sectional area. RESULTS: %correct was affected by the interaction Foil Thickness-by-SSA (p = 0.007). When tested with the 8 µm foil, the HighSSA group had a lower %correct than the IntSSA (contrast estimate [95% CI]: -14.2 [-25.8 - -2.6]; p = 0.012) and the LowSSA groups (-19.1 [-31.5 - -6.6]; p = 0.001). Similarly, with the 24 µm foil, the HighSSA group had a lower %correct compared to the IntSSA (-12.4 [-24.8-0.1]; p = 0.048) and the LowSSA groups (-10.8 [-22.5-0.8]; p = 0.073). CONCLUSION: Individuals with high SSA present with an aberrant occlusal sensitivity. CLINICAL RELEVANCE: Our findings provide novel insights into the relationship between occlusal perception and psychological factors, which may influence an individual's ability to adapt to dental work.

Adjacent Implant Influence on Tooth Restoration in a Gastro-Esophageal Reflux Disease (GERD) Patient Using Monoblock Post-Fused Crown: A Case Report.

This case report explores how the presence of an adjacent implant influenced the restoration of a tooth with pulpitis in a gastro-esophageal reflux disease (GERD) patient. A patient with GERD requires a tooth-colored crown not only for aesthetics but also to address potential galvanic concerns arising from an adjacent implant. GERD, a condition causing non-cavity erosion, weakens tooth structure over time, presenting significant challenges in treatment. It resulted in bite relapse and insufficient occlusal clarity over time. A comprehensive treatment approach was needed to restore both function and appearance. This involved managing galvanism using non-metallic materials to ensure optimal occlusal clarity, as well as meticulously reinforcing and restoring tooth structure. Monoblock post-fused crowns were chosen for their superior durability, stability, and comfort. The ceramic layering not only effectively prevented galvanic issues by insulating the tooth structure but also significantly improved the natural appearance of teeth, thereby promoting long-term oral health and successfully managing complex dental concerns. The dental team successfully restored the damaged tooth by considering specific factors that influenced the treatment plan, including achieving optimal aesthetic outcomes.

Relationship between Body Posture Assessed by Dynamic Baropodometry and Dental Occlusion in Patients with and without Dental Pathology.

Body biomechanics and dental occlusion are related, but this interaction is not fully elucidated. The aim of this study was to investigate the association between body posture and occlusion in patients with and without dental pathology. A cross-sectional study was carried out with 29 patients divided into a control group and a group with pathology (malocclusions). Body posture was evaluated by dynamic baropodometry, analyzing parameters such as the line of gait and the anteroposterior and lateral position of the center of pressure (CoP). Occlusion was classified radiographically according to the sagittal skeletal relationship. Results showed significant differences in mean position phase line between groups (p = 0.01-0.02), with means of 115.85 ± 16.98 mm vs. 95.74 ± 24.47 mm (left side) and 109.03 ± 18.03 mm vs. 91.23 ± 20.80 mm (right side) for controls and pathologies, respectively. The effect size was large (Cohen's d 0.97 and 0.92). There were no differences in the anteroposterior (p = 0.38) or lateral (p = 0.78) position of the CoP. In gait analysis, significant differences were observed in left (548.89 ± 127.50 N vs. 360.15 ± 125.78 N, p < 0.001) and right (535.71 ± 131.57 N vs. 342.70 ± 108.40 N, p < 0.001) maximum heel strength between groups. The results suggest an association between body posture and occlusion, although further studies are needed to confirm this relationship. An integrated postural and occlusal approach could optimize the diagnosis and treatment of dental patients.

Occlusal characteristics in modern humans with tooth agenesis.

Non-syndromic permanent tooth agenesis affects a significant proportion of the population, especially if third molars are considered. Although tooth agenesis has been linked to a smaller craniofacial size, reduced facial convexity and a shorter skeletal face, the occlusal characteristics of individuals with tooth agenesis remain largely unexplored. Therefore, this study investigated potential associations between tooth agenesis and metric occlusal traits in 806 individuals (491 with 4.1 missing teeth per subject, including third molars, and 315 without any tooth agenesis). Dentoskeletal morphology was defined through anatomical landmarks on pre-treatment cephalometric radiographs. Multivariate regression models, adjusted for sex and age, showed that tooth agenesis was significantly associated with a reduced overjet, an increased interincisal angle, and shorter upper and lower dental arch lengths, but not with overbite. Moreover, apart from reduced tooth length and dentoalveolar effects, as the number of missing teeth increased the upper front teeth were progressively retruded according to the craniofacial complex and to the face. Thus, tooth agenesis has a substantial influence on dental and occlusal characteristics, as well as on the sagittal position and inclination of anterior teeth. These findings emphasize the necessity for personalized, multidisciplinary approaches in individuals with multiple agenesis to successfully meet treatment goals.

Association of tooth location, occlusal support and chewing ability with cognitive decline and incident dementia.

AIM: Emerging evidence suggests association of tooth loss with impaired cognition. However, the differential effects of anterior versus posterior tooth loss, occlusal support loss and chewing ability are not considered comprehensively. MATERIALS AND METHODS: We conducted cross-sectional (N = 4036) and longitudinal analyses (N = 2787) on data from Health 2000 and 2011 Surveys for associations of posterior occlusal support loss, anterior versus posterior tooth loss, and chewing ability with baseline cognition and 11-year cognitive decline. Additionally, 15-year incident dementia risk was investigated (N = 4073). RESULTS: After considering relevant confounders and potential reverse causality bias, posterior occlusal support loss significantly increased dementia risk across all categories indicative of posterior occlusal support loss (hazard ratios [HRs] between 1.99 and 2.89). Bilateral inadequate posterior occlusal support was associated with 11-year decline in overall cognition (odds ratio [OR] = 1.48:1.00-2.19), and unilateral inadequate posterior occlusal support with total immediate (OR = 1.62:1.14-2.30) and delayed recall decline (OR = 1.45:1.03-2.05). Moreover, posterior tooth loss was associated with dementia (HR = 2.23:1.27-3.91) and chewing ability with total immediate decline (OR = 1.80:1.04-3.13). CONCLUSIONS: Posterior tooth and occlusal support loss significantly increases dementia risk. The impact of posterior occlusal support loss appears to be dose-dependent, and this effect is distinct from that of dentures. Dental healthcare services should be particularly attentive to the state of posterior dentition. Further studies exploring possible mechanisms are warranted.

Reference values and reliability of occlusal force distribution and occlusal time measured by the T-Scan system in adults with healthy dentition.

PURPOSE: Reference values of occlusal characteristics are needed to interpret the data obtained using the T-Scan System. This study aimed to establish reference values for and to assess the reliability of, occlusal force distribution in the maximal intercuspal position and the occlusion time in young adults with healthy dentition. MATERIALS AND METHODS: In total 178 adults with natural dentition participated in this retrospective cross-sectional study, of whom 76 performed a retest session. Several occlusal recordings were obtained from each participant using the T-Scan system while asking them to bite two or three consecutive times (multi-bite) or only once (single-bite) at the maximal intercuspal position. The lateral and anteroposterior occlusal force distribution were determined as percentages in the right and posterior teeth . Occlusion time was measured in seconds. After the occlusal force distribution and occlusion time percentiles were calculated, reliability was assessed by the intraclass correlation coefficient. RESULTS: The 5th-95th percentiles for occlusal force distribution were 34%-67% on the right teeth and 55%-94% on the posterior teeth. The 90th percentile for multi-bite occlusion time was 0.17 s and for single-bite occlusion time was 0.27 s. The intraclass correlation coefficients for lateral occlusal force distribution, anteroposterior occlusal force distribution, multi-bite occlusion time, and single-bite occlusion time were 0.70, 0.68, 0.58, and 0.67, respectively. CONCLUSIONS: This study generated reference values for key occlusal characteristics (occlusal force distribution and occlusion time) when using the T-Scan system. These values showed moderate reliability.

Chewing Function with Efficiency Tests in Subjects Wearing Clear Aligners.

This study assessed the masticatory function of participants wearing clear aligners in order to determine whether these devices can be worn even when eating and therefore worn to extend treatment time and boost treatment effectiveness. An intercontrol test was conducted on 20 patients who received Invisalign® treatment. Each participant was instructed to chew two pieces of Hue-Check Gum® chewing gum (one pink and the other blue) in 5, 10, and 20 cycles both with and without aligners. After being removed from the oral cavity, the gum was dried and pressed using a 1 × 50 × 50 mm model that was 3D printed with a transparent layer in between. After being scanned on both sides with a flatbed scanner at 600 dpi, the samples were saved as jpg files and subjected to an optoelectronic examination using ViewGum software. To validate the procedure, a control group from a different institution (University of Bern) was used. A statistical analysis of the data was carried out. The Shapiro-Wilk test was used to confirm the normality of the samples. A one-way ANOVA test, a homogeneity of variance test, and a t-test did not reveal statistically significant differences between the two control groups, thus validating the methodology employed. In summary, clear aligners do not radically change the masticatory function while they are worn. As a result, clinicians can exploit the aligners for chewing to obtain a better fit of the plastic material to the dental surface and to attachments. Treatment times for patients could also be shorter.

Correlation between Malocclusion and Mandibular Fractures: An Experimental Study Comparing Dynamic Finite Element Models and Clinical Case Studies.

Mandibular fractures are very common in maxillofacial trauma surgery. While previous studies have focused on possible risk factors related to post-operative complications, none have tried to identify pre-existing conditions that may increase the risk of mandibular fractures. We hypothesized, through clinical observation, that anatomical conditions involving poor dental contacts, such as malocclusions, may increase the risk of mandibular fractures. This work was subdivided into two parts. In the first part, Digital Imaging and Communications in Medicine (DICOM) data of four healthy patients characterized by different dentoskeletal occlusions (class I, class II, class III, and anterior open bite) have been used to develop four finite element models (FEMs) that accurately reproduce human bone structure. A vertical and lateral impact have been simulated at increasing speed on each model, analyzing the force distribution within the mandibular bone. Both vertical and lateral impact showed higher level of stress at the impact point and in the condylar area in models characterized by malocclusion. Specifically, the class III and the open bite models, at the same speed of impact, had higher values for a longer period, reaching critical stress levels that are correlated with mandibular fracture, while normal occlusion seems to be a protective condition. In the second part of this study, the engineering results were validated through the comparison with a sample of patients previously treated for mandibular fracture. Data from 223 mandibular fractures, due to low-energy injuries, were retrospectively collected to evaluate a possible correlation between pre-existing malocclusion and fracture patterns, considering grade of displacement, numbers of foci, and associated CFI score. Patients were classified, according to their occlusion, into Class I, Class II, Class III, and anterior open bite or poor occlusal contact (POC). Class I patients showed lower frequencies of fracture than class II, III, and open bite or POC patients. Class I was associated with displaced fractures in 16.1% of cases, class II in 47.1%, class III in 48.8% and open bite/POC in 65.2% of cases (p-value < 0.0001). In class I patients we observed a single non-displaced fracture in 51.6% of cases, compared to 12.9% of Class II, 19.5% of Class III and 22.7% of the open bite/POC group. Our analysis shows that class I appears to better dissipate forces applied on the mandible in low-energy injuries. A higher number of dental contacts showed a lower rate of multifocal and displaced fractures, mitigating the effect of direct forces onto the bone. The correlation between clinical data and virtual simulation on FEM models seems to point out that virtual simulation successfully predicts fracture patterns and risk of association with different type of occlusion. Better knowledge of biomechanics and force dissipation on the human body may lead to the development of more effective safety devices, and help select patients to plan medical, orthodontic/dental, and/or surgical intervention to prevent injuries.

The surgery-first approach for orthognathic correction of maxillary deficiency-is it stable? Three-dimensional assessment of CBCT scans and digital dental models.

The aim of this study was to determine the skeletal stability of Le Fort I maxillary advancement following the surgery-first approach, by three-dimensional (3D) assessment of cone beam computed tomography (CBCT) scans and digital dental models. CBCT scans of 25 class III patients obtained 1 week preoperatively (T0) and 1 week (T1) and 6 months (T2) postoperatively were superimposed to measure surgical movements (T0-T1) and skeletal relapse (T1-T2). The distorted dentition of the CBCT scans at T1 was replaced with 3D images of the dental models to assess the postoperative occlusion. Surgical movements of the maxilla (mean ± standard deviation values) were 6.79 ± 2.30 mm advancement, 1.28 ± 1.09 mm vertically, and 0.71 ± 0.79 mm mediolaterally. Horizontal rotation (yaw) was 1.56° ± 1.21°, vertical rotation (pitch) 1.86° ± 1.88°, and tilting (roll) 1.63° ± 1.54°. At T2, the posterior relapse was 0.72 ± 0.43 mm (P = 0.001) and relapse in pitch was 1.56° ± 1.42° (P = 0.007). There was no correlation between the size of the surgical movements and the amount of relapse. A weak correlation was noted between the number of teeth in occlusal contact immediately following surgery and relapse of maxillary roll (r = - 0.434, P = 0.030). The stability of maxillary advancement with the surgery-first approach was satisfactory and was not correlated with the quality of the immediate postoperative occlusion.

Histological changes in pulp-dentin complex in tooth subjected to traumatic occlusion and subluxation.

Background: This study evaluated the influence of traumatic occlusion in the dentin-pulp complex a molar teeth submitted to subluxation. Material and methods: Ninety Wistar rats were divided into groups Naïve (N), Subluxation (S) and Subluxation with traumatic occlusion (STO) and submitted to histological analysis after 7 and 21 days. A quantitative analysis was submitted to one-way ANOVA and Tukey's post-hoc test, and Chi-square and Bonferronís post-hoc test. Results: S and STO showed a significant increase in blood vessels area (p < 0.0005), amorphous fundamental substance (p < 0.0005) and reactionary dentin formation (p < 0.0005), as well as a decrease in the nuclear profile (p < 0.0005), odontoblast layer (p = 0.013 and p < 0.0005) by day 7 when compared with N. These changes normalized by day 21, except for the reactionary dentin (p < 0.0005) in both S and STO groups. Interestingly, the STO group exhibited significant changes in the increase of pulp calcification (p < 0.0005), presence of tubules with nuclei (p < 0.0005), and inflammatory infiltrate (p < 0.0005), as well reduction of nuclear profile (p < 0.0005), odontoblast layer (p < 0.0005) compared with N and S at day 21. Conclusions: STO impaired the defence response and decreased pulp regeneration capacity by increasing the inflammatory infiltrate and pulp calcification, and decreasing the nucleated cell number in the odontoblast layer and central pulp.

An Anatomorphometric Study of Occipital Spurs and Their Association With Dental Occlusion.

Background and objective The occipital spur (OS) can be described as an abnormal elongation of the external occipital protuberance (EOP); its etiology is multifactorial and may involve biomechanical, immunological, and/or genetic factors. This study aimed to determine the frequency and characteristics of elongated EOP or OS as well as the relationship of OS with occlusion in a group of Turkish dental patients. Materials and methods Lateral cephalometric radiographs of 1925 patients taken in 2022 were retrospectively analyzed. The frequency, types, and dimensions of OS were determined based on gender and age groups. Molar occlusion and incisal bite were also evaluated. Results Of the 1925 patients, 679 were males and 1246 were females. The mean age of the cohort was 18.17 ±5.03 years (range: 4-61). OS was detected in 483 (25.1%) patients and was more common in males (p<0.001); 133 (27.5%) of the OSs were flat, 247 (51.1%) crest, and 103 (21.3%) spin type. The incidence of OS increased depending on age groups (p<0.001). There was no statistically significant association between OS presence and molar occlusion (p>0.05). However, a statistically significant association was observed between anterior incisal bite (p=0.001) and OS presence. There was a statistically significant difference in terms of OS sizes in males and females; the sizes of OS were larger in males than in females (length: p<0.05, base and thickness: p<0.001). Conclusions The frequency of OS was quite high in our cohort; it was more common and of larger size in males and older age groups. The most common type was the crest type. While there was no statistically significant association between OS frequency and molar occlusion, there was a significant relationship with incisal bite. The frequency of OS was highest in people with anterior crossbite.

A Proof of Concept: Optimized Jawbone-Reduction Model for Mandibular Fracture Surgery.

Previous research on computer-assisted jawbone reduction for mandibular fracture surgery has only focused on the relationship between fractured sections disregarding proper dental occlusion with the maxilla. To overcome malocclusion caused by overlooking dental articulation, this study aims to provide a model for jawbone reduction based on dental occlusion. After dental landmarks and fracture sectional features are extracted, the maxilla and two mandible segments are aligned first using the extracted dental landmarks. A swarm-based optimization is subsequently performed by simultaneously observing the fracture section fitting and the dental occlusion condition. The proposed method was evaluated using jawbone data of 12 subjects with simulated and real mandibular fractures. Results showed that the optimized model achieved both accurate jawbone reduction and desired dental occlusion, which may not be possible by existing methods.

Dental occlusion characteristics in subjects with bruxism.

Background and aims: Bruxism is associated with a variety of factors, some of which are oral (occlusion, joint, face shape) while others are of a systemic nature (respiratory, cardiac, neurotransmitters, stress). The relationship between bruxism and occlusion has received great attention, but it still has a lot of ambiguity. This study aimed at investigating the parameters that may affect bruxism: dental interferences or premature contacts, vicious habits, temporomandibular joint (TMJ) pain, TMJ noises, TMJ morning fatigue, snoring, obstructive sleep apnea, which may occur before bruxism, or because of chronic parafunction. Methods: We conducted an observational, analytical case-control study to determine the association between bruxism and oral cavity factors as well as general factors. Participants were chosen from a group of middle-aged Romanian population. An online questionnaire was used for data collection. A total of one hundred subjects were included in the sample. Fifty cases with bruxism were chosen as a study group, and another fifty persons of similar ages were chosen as a control group. Statistical analysis was performed using the MedCalc version 20.110 software. Results: The study comprised subjects between 18 and 42 years old. The most prevalent age range was between 20-25 years. The female-male ratio was almost similar; 62% of the participants had sleep bruxism, 10% had awake bruxism and 28% had a combined form. The arithmetic means of the daily stress levels for both research groups' scores were 3.0 for the bruxism group and 3.24 for the control group, while the work stress was 3.04 for the bruxism group and 3.41 for the control group. Dental interferences or premature contacts, vicious habits, TMJ pain, TMJ noises, TMJ morning fatigue, snoring, and obstructive sleep apnea were evaluated. The majority of subjects received an oral splint (n=26). Conclusions: Bruxism was associated with stress, occlusal parameters (premature contacts and occlusion interferences), and joint pathologies. Bruxism was not found to be positively correlated with obstructive sleep apnea syndrome. There was a moderately significant association between bruxism and snoring. There was no evidence of an association between bruxism and vicious habits, dental aesthetics, or obstructive sleep apnea. Treatment significantly improved the quality of life, the masticatory and joint functions.

Influence of the radius of Monson's sphere and excursive occlusal contacts on masticatory function of dentate subjects.

OBJECTIVE: To determine the influence of the radius of Monson's sphere, the number of posterior laterotrusive, mediotrusive, and protrusive contacts, and the chewing rate on food comminution. DESIGN: Sixty healthy dentate subjects, aged 21.22 ± 2.30 years, were selected. The three-dimensional coordinates of the cusp tips of the lower canine, premolar, and molar teeth were identified from the subjects' digital models. Monson's sphere was designed using the simplex method for function minimisation by adjusting the coordinates on its surface. The contacts were verified using 12 µm metal strips in jaw excursions at 0.5, 1.0, 2.0, and 3.0 mm. The masticatory performance and efficiency, swallowing threshold, and chewing rate were assessed through particle size fractionation. Data were analysed with multiple linear regression (α = 0.05). RESULTS: The sphere's radius, laterotrusive and protrusive contacts at 0.5 mm, and chewing rate were found to be negative predictor variables for masticatory performance until 20 chewing cycles (R2 = 0.429). For 40 cycles, the radius and total contacts (0.5 mm) were also explanatory factors (R2 = 0.223). Only the radius (R2 = 0.176) and the chewing rate (R2 = 0.082) were found to be significant for 60 cycles and swallowing threshold, respectively. Masticatory efficiency was influenced by masticatory performance until 40 and 60 cycles, as well as the radius and total contacts at 2.0 and 3.0 mm (R2 = 0.958). CONCLUSION: A larger radius of Monson's sphere and a greater number of posterior excursive contacts were found to be related to better masticatory function.

Effect of artificial eccentric occlusal interferences on masticatory performance: A randomised double-blind clinical trial.

BACKGROUND: Occlusal interferences lead to changes in mandibular kinematics to compensate and improve function. However, the effects of different types of eccentric disturbance on the comminution capacity are not known. OBJECTIVE: To determine the immediate effect of eccentric occlusal interferences on masticatory performance. METHODS: This crossover clinical trial included 12 healthy dentate subjects aged 25.2 ± 3.3 years who were randomly submitted to seven types of occlusal interference: unilateral and bilateral laterotrusive and mediotrusive, protrusive, dummy and control (no interference). The interference forms were planned in a semi-adjustable articulator, fabricated with composite resin and adhered to the mandibular first molars such that subjects' maximum intercuspation was maintained. Masticatory performance and the chewing rate during 20 cycles were evaluated during subjects' comminution of silicone test food under one interference condition per test day; the multiple sieve method was applied to the comminuted particles. The interference was removed upon test completion, and a 1-week washout period was applied between tests. RESULTS: Comminuted median particle sizes were larger under unilateral (4.94 ± 0.41 mm) and bilateral (4.81 ± 0.49 mm) laterotrusive, bilateral mediotrusive (4.65 ± 0.50 mm) and protrusive (4.83 ± 0.54 mm) interferences (p < .05) than under the control (4.01 ± 0.52 mm) and dummy (4.18 ± 0.58 mm) conditions (p < .05). Only unilateral and bilateral laterotrusive interferences narrowed the comminuted particle size dispersion (p < .05). The chewing rate did not differ among conditions (p = .1944). CONCLUSION: Artificial eccentric interferences had an immediate adverse effect on masticatory performance by resulting in larger comminuted particles. CLINICAL TRIAL REGISTRATION: Brazilian Registry of Clinical Trials (RBR-8g5zfg8).

Three-dimensional analysis of posterior tooth inclinations in transverse and sagittal relationships: A cross-sectional study.

OBJECTIVE: To compare tooth inclinations in different sagittal skeletal patterns and transverse maxillary relationships three-dimensionally. METHODS: A cross-sectional study carried out with 132 three-dimensional digital models in the complete permanent dentition divided into six groups (n=22); three groups with maxillary atresia: G1- skeletal class I, G2- skeletal class II and G3-skeletal class III; three groups without maxillary atresia: G4- skeletal class I; G5- skeletal class II and G6- skeletal class III. The comparison between the skeletal pattern was performed by the non-parametric tests of Kruskal Wallis and Dunn and between the groups by the non-parametric test of Mann Whitney. RESULTS: Subjects with skeletal class II and maxillary atresia had a greater lingual inclination of the maxillary teeth than those with class I and III; Subjects with skeletal class II without atresia had a less lingual inclination of the mandibular molars than the other classes (p<0.05). The maxillary premolars showed no variation in dental inclination with atresia, independent of the skeletal class in G1, G2, and G3 (p>0.05). The mandibular premolars showed that the groups without atresia G4, G5, and G6 presented no significant difference (p>0.05). Lower premolars in skeletal class III malocclusion individuals with atresia had a more negative inclination than the others. CONCLUSION: There is a difference in the inclination of posterior teeth between individuals with and without maxillary atresia and skeletal classes I, II, and III.

Occlusion development after premature loss of deciduous anterior teeth: preliminary results of a 24-month prospective cohort study

ABSTRACT Objective: This study aimed to evaluate occlusion development after premature loss or extraction of deciduous anterior teeth, by means of a prospective cohort study. Methods: Fifteen infants and children aged 1 to 5 years old were longitudinally assessed (with loss or extraction of deciduous anterior teeth [n = 9], and without tooth losses [n = 6]). Photographs and dental casts at the baseline and after 24 months of follow-up were performed. Dental casts were scanned, and linear measurements were made on the digitalized models (missing tooth space, arch perimeter, arch length, arch width, intercanine length and intercanine width). The t-test was used for groups comparisons (α = 0.05). Results: Individuals' mean age at baseline was 2.93 (± 1.18) years. No statistically significant differences were observed in the missing tooth space in the group with tooth loss during the 24 months of follow-up (p > 0.05). Arch perimeter, arch length, arch width, intercanine length and intercanine width did not show differences between the groups (p > 0.05). Qualitative photographic evaluation revealed other changes in the dental arches and occlusion, such as exfoliation and eruption of deciduous teeth, eruption of permanent teeth, self-correction or establishment of malocclusion, among others. Conclusion: The results suggest that the premature loss of deciduous anterior teeth does not affect the perimeter, length and width of the dental arches; however, other alterations that lead to malocclusion could be established.

RESUMO Objetivo: Este estudo teve como objetivo avaliar o desenvolvimento da oclusão após perda prematura ou extração de dentes decíduos anteriores, por meio de um estudo de coorte prospectivo. Métodos: Quinze bebês e crianças de 1 a 5 anos foram avaliados longitudinalmente (com perda ou extração de dentes anteriores decíduos [n = 9] e sem perdas dentárias [n = 6]). Foram realizadas fotografias e modelos dentais no início e após 24 meses de acompanhamento. Os modelos dentários foram escaneados e medidas lineares foram feitas nos modelos digitalizados (espaço dentário perdido, perímetro da arcada, comprimento da arcada, largura da arcada, comprimento intercaninos e largura intercaninos). O teste t foi utilizado para comparações entre grupos (α = 0,05). Resultados: A média de idade dos indivíduos no início do estudo foi de 2,93 (± 1,18) anos. Não foram observadas diferenças estatisticamente significativas no espaço dentário perdido no grupo com perda dentária durante os 24 meses de acompanhamento (p > 0,05). O perímetro da arcada, comprimento da arcada, largura da arcada, comprimento intercaninos e largura intercaninos não apresentaram diferenças entre os grupos (p> 0,05). A avaliação fotográfica qualitativa revelou alterações nas arcadas dentárias e na oclusão, como: esfoliação e erupção de dentes decíduos, erupção de dentes permanentes, autocorreção ou estabelecimento de má oclusão, entre outras. Conclusão: Os resultados sugerem que a perda prematura de dentes anteriores decíduos não afeta o perímetro, comprimento e largura das arcadas dentárias; entretanto, outras alterações que levam à má oclusão poderiam ser estabelecidas.

The Occlusal Side Effects of Mandibular Advancement Device Therapy in Adult Sleep Apnea Patients: A Systematic Review.

Mandibular advancement devices (MADs) remain a popular non-invasive treatment modality for the management of obstructive sleep apnea (OSA). However, the occlusal side effects from long-term therapy may result in poor patient compliance and patient drop-outs. Hence, knowledge of the possible side effects of these devices on occlusion is necessary. This article attempts to systematically review the evidence available in support of the possible long-term effects of mandibular advancement therapy on occlusion in adult sleep apnea patients. A detailed search was conducted for unpublished and published literature and their references in various electronic databases. A grey literature search was also performed. Studies until June 30, 2022, were selected. Randomized controlled trials, non-randomized trials, and cohort studies investigating the occlusal side effects of MADs for the treatment of snoring or OSA with a follow-up of at least four years were included. Study selection, data extraction, and risk of bias assessment were performed individually and in duplicate. The risk of bias was assessed by Cochrane tools for randomized and non-randomized studies. Fourteen studies were selected for the final qualitative analysis. The side effects reported were upper incisor retroclination, lower incisor proclination, decreased overjet and overbite, and change in the total occlusal contact area. The review concludes that long-term MAD therapy has statistically and clinically significant effects on occlusion.

Multidisciplinary Aesthetic Management of a Dentition in a Patient with Cleft Lip and Palate with a High Smile Line: A Clinical Report.

The aesthetic management of a case involving a high smile line in a patient with a cleft lip and palate can be difficult. In this report, we look at a complex case of a patient with a unilateral cleft lip and palate which required a multidisciplinary approach involving crown lengthening, extraction of a maxillary right central incisor and fabrication of a 4-unit fixed partial denture to replace this tooth and the adjacent absent maxillary right lateral incisor with use of gingival porcelain in order to improve the aesthetics of the patient's smile.

Low translational and rotational movements with 2-point stainless-steel retainers over a period of 1 and 3 years.

OBJECTIVES: Long-term stabilization of orthodontic treatment outcomes is an everyday challenge in orthodontics. The use of permanently attached lingual retainers has become gold standard. However, in some cases, patients with fixed lingual retainers show retainer-associated side effects. Aiming to reduce these side effects, clinical knowledge about how tooth and arch form stability adaption takes place over time is important to improve long-term retention protocols. Therefore, the present study aimed to investigate occlusion stability and risks for a newly developing malocclusion in a time-dependent manner in patients being treated with permanent 2­point steel retainers. MATERIALS AND METHODS: In this retrospective cohort study, a total of 66 consecutive patients with round stainless-steel retainers were analyzed for postorthodontic occlusion changes after 1 year (group 1, n = 33) and 3 years (group 2, n = 33). Digital Standard Tessellation Language (STL) datasets of the lower jaw were obtained before retainer insertion (T0), and after a 1- (T1) or 3­year (T2) retention period. Using superimposition software, T1 and T2 situations were compared to T0 regarding rotational and translational changes in tooth positions in all three dimensions. RESULTS: Occlusion changes were low in both groups. The investigated lower canines were nearly stable in the 1­ and 3­year group, although a retention-time-dependent increase in tooth position change of the central and lateral incisors could be observed. CONCLUSION: The present data provide evidence for time-dependent development of posttherapeutic occlusal adaption limited to central and lateral incisors in patients treated with a 2-point retainer. The observed occlusal changes should be interpreted as an occlusal adaption process rather than severe posttreatment changes associated with the orthodontic retainer.